Cisco (WS-C2960-24TT-L) Catalyst 2960 24 10 100 + 2 1000BT LAN Base Image

Cisco Catalyst 2960 Intelligent Ethernet Switch is a new family of fixed-configuration standalone device that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, and branch office networks. The Catalyst 2960 offers integrated security, including network admission control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.

• 24 x Fast Ethernet Network
• 2 x Gigabit Ethernet Uplink

• 10Base-T
• 10/100/1000Base-T

• Cisco Network Assistant
• CiscoWorks Support
• Device manager
• Cisco Express Setup
• CiscoView application
• Cisco Network Assistant Software
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
• Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches
• Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches
• Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN
• Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements
• VLAN trunks can be created from any port using standards-based 802.1q tagging
• Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.
• Four thousand VLAN IDs are supported
• Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting
• Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches
• SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
• Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery

• Catalyst 2960-24TT Ethernet Switch
• Catalyst 2960 Switch Getting Started Guide
• Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
• AC power cord
• One RJ-45-to-DB-9 adapter cable
• Mounting kit containing
• Four rubber feet for mounting the switch on a table
• Two 19-inch rack-mounting brackets (also used for wall mounting)
• Six Phillips flat-head screws for attaching the brackets to the switch
• Four Phillips machine screws for attaching the brackets to a rack
• One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
• One Redundant Power System (RPS) connector cover (for wall mounting)
• Two Phillips pan-head screws (for attaching the RPS cover)
• Four Phillips truss-head screws (for wall-mounting brackets)

• 64 MB DRAM
• 32 MB flash memory
• LAN Base Image installed
• Configurable up to 8000 MAC addresses
• Configurable up to 255 IGMP groups
• Cisco Catalyst 2960-24TT: 282,416 hr
• Superior Redundancy for Fault Backup
• Integrated Cisco IOS Software Features for Bandwidth Optimization
• Advanced QoS
• Granular Rate Limiting
• Networkwide Security Features