| Description |
| Manufacturer: | Schneider Electric SA |
| Manufacturer Part Number: | PTEL2 |
| Manufacturer Website Address: | http://www.schneider-electric.com.au |
| Brand Name: | APC by Schneider Electric |
| Product Line: | ProtectNet |
| Product Name: | ProtectNet Analog Telephone Line Surge Suppressor |
| Marketing Information: | Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: Direct contact between components and power or lightning circuits, static charge buildup on cables and component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) and potential differences (even from building to building, between safety grounds to which components are connected.) |
| Product Type: | Surge Suppressor/Protector |
| Technical Information |
| Dataline Protection: | Modem/Fax/DSL |
| Power Description |
| Maximum Surge Current: | 200 A |
| Environmental Conditions |
| Maximum Operating Temperature: | 45°C |
| Physical Characteristics |
| Product Color: | Beige |
| Height: | 102.9 mm |
| Width: | 47.5 mm |
| Depth: | 27.9 mm |
| Weight (Approximate): | 63.5 g |
| Miscellaneous |
| Additional Information: | - Catastrophic Event Protection
- Standard Warranty: 10 Year Repair/Replace
|
| System Requirements: | - Use only for analog modems, fax machines and other telecommunication devices
- The PTEL2 must be connected to earth ground
|
| Certifications & Standards: | |
